TECASON S Polysulfone
TECASON™S is a transparent engineering plastic known for its chemical resistance, rigidity, high-temperature performance, and its ability to operate in an autoclave environment. TECASON™S is FDA and NSF compliant and holds its excellent mechanical properties over a wide range of temperatures.
- Autoclave resistance
TECASON™S maintains dimensional stability and mechanical performance through repeated autoclaves. - Excellent electrical properties
- Good chemical resistance
TECASON™S performs well in mineral acids, alkali, salt solutions, and hydrocarbons. - Superior resistance to creep
- FDA and NSF compliant
- High-temperature performance
TECASON™S has a heat deflection temperature of 345°F and a long-term continuous use temperature of 285°F. - Excellent hydrolytic stability
- High strength and rigidity
- Flame retardant
TECASON™S is rated UL94 V-O
TECASON™S' unique combination of chemical and hydrolytic resistance, hightemperature performance, good mechanical properties, and agency approvals make it an excellent choice for applications in the pharmaceutical, medical, food service equipment, semiconductor processing, and electronic equipment industries.
| Properties | ASTM Test Method | Units | TECASON™ S | |
|---|---|---|---|---|
| Physical | Density | D792 | lbs/in3 | 0.045 |
| Specific Gravity | D792 | - | 1.24 | |
| Water Absorption, @24 hours, 73°F | D570 | % | 0.30 | |
| Mechanical | Tensile Strength @ Break, 73°F | D638 | psi | 10,200 |
| Tensile Modulus, 73°F | D638 | psi | 3.6 x 105 | |
| Elongation @ Break, 73°F | D638 | % | 50 - 100 | |
| Flexural Strength, 73°F | D790 | psi | 15,400 | |
| Flexural Modulus, 73°F | D790 | psi | 390,000 | |
| Izod Impact Strength, Notched, 73°F | D256 | ft-lbs/in | 1.3 | |
| Rockwell Hardness | D785 | "R" Scale | 120 | |
| Coefficient of Friction, 40 psi, 50 fpm | - | Dynamic | 0.37 | |
| Thermal | Deflection Temperature @ 66 psi @ 264 psi |
D648 D648 |
°F °F |
358 345 |
| Maximum Temperature, Long Term Short Term |
- - |
°F °F |
285 340 |
|
| Coefficient of Linear Thermal Expansion | D696 | in/in/°F | 3.1 x 10-5 | |
| Electrical | Dielectric Strength | D149 | V/mil | 425 |
| Dielectric Constant, @ 60 Hz, 73°F, 50% RH | D150 | - | 3.1 | |
| Dissipation Factor, @ 60 HZ, 73°F | D150 | - | 0.001 | |
| Volume Resistivity, 73°F | D257 | ohm-cm | 5 x 10116 | |
| This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. TECASON™S - Ensinger Industries, Inc. |
||||
