DELRIN® 570 - 20% glass fiber filled
DELRIN®570 Shapes manufactured by Ensinger are 20% glass filled materials intended for general industrial use. The material offers very high stiffness, low warpage, and low creep for superior part performance under stress.
- Very good dimensional stability
- Glass fibers offer stiffness but not reinforcement
- Good machinability
DELRIN® 570 is used in a variety of industries such as automotive or construction where added strength and stiffness are desirable.
|Mechanical||Modulus of elasticity (tensile test)||340,000||psi||ASTM D 638|
|Tensile strength at yield||8,700||psi||ASTM D 638|
|Elongation at yield||10||%||ASTM D 638|
|Notched impact strength (Izod)||0.80||ft-lbs/in||ASTM D 265|
|Rockwell hardness||M Scale||81||%||ASTM D 785|
|Thermal||Melting temperature||347||°F||1)||1) Injection molded data|
|Deflection temperature||@ 264 psi||311||°F||ASTM D 648 1)|
|Service temperature||Long term||185||°F||-|
|Electrical||Specific surface resistance||@ 73°F||200e+15||Ω||ASTM D 257 1)|
|Dielectric strength||@ 73°F||452||V/mil||ASTM D 149 1)|
|Dielectric constant||@ 100 MHz; 73°F||3.8||ASTM S 150 1)|
|Other||Moisture absorption||@ 24 hrs, 73°F||0.15||%||ASTM D 570|
|Flammability (UL94)||HB||2)||2) Injection molded data (1.5mm thick)|
This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. Data obtained from extruded shapes material. DELRIN® - Registered trademark of DuPont.